The ClubMaker's Series 1 was designed for the professional clubmaker. Its small and compact in design measuring 8" x 8" x 14" and light in weight at 26 pounds. The Clubmaker's Series I has a single cutter tool mounted to the machine, additional pre-set cutters are available. Change-over of tools is quick and easy, taking 2 to 3 minutes to facilitate the change. The cutters are adjustable from 1/4" to 1/2" diameter up to 2" of depth of cut.
The Clubmaker's Series 1 provides:
 |
Consistent, clean tip preparation tip after tip after tip |
|
Adjustable to ANY size requirements, both diameter and depth (±.001) from 1/4" - 1/2" up to 2" depth of cut |
|
Change-over system allows tip diameter change in 2 to 3 minutes. |
|
Finish enhances bonding strength |
|
Completely dry operation eliminates hazardous waste |
|
Designed to use a standard 1-1/4" shop vacuum hose which fits over the "snout" of the ClubMaker. |
|
Small, portable compact design can fit anywhere |
|
Available options include stand, vacuum system, and foot control. |
The ClubMaker method of graphite shaft tip preparation has been approved by:
|
TaylorMade |
|
Cleveland Golf |
|
Ping |
|
Wilson |
|
True Temper |
|
Zevo Golf |
|
Titleist |
|
Fujikura |
Club Makers' Series I
